Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson Cinetic Big Ball Animal + vacuum

Let's get your machine working.

See all steps

Please select the appropriate option

Checking the machine for blockages

Remove any tool from the extension tube.

Fully extend the extension tube by pressing the red button.

Turn the machine on and place your hand ove the end of the extension tube.

Is the suction strong or weak?

How to use the floor tool

For use on carpet flooring, the purple seal should be in the 'up' position.

For use on hard flooring, the purple seal should be in the 'down' position.

For use on hard flooring, the purple seal should be in the 'down' position.

Has checking the floor tool settings resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the floor tool for blockages and damage

Fully remove the floor tool from the machine.

Check both inlets for blockages and remove as necessary.

Has checking the floor tool resolved the problem?

Remove the hose, wand handle and extension tube

Separate the extension tube from the Wand handle by pressing the release catch on the extension tube.

Remove the hose from the machine by pressing the release catches on the hose.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

Reassemble and test machine.

Has checking the hose, Wand handle and Wand resolved the problem?

To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.

Cleaning the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

The bin will slide down, cleaning the shroud as it goes.

The red rod should stop level with the clear bin. If not sliding the bin back up will not be possible.

The bin base will then open.

The bin base will not open if the red button is not pushed down fully.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check cyclone inlet and openings for any blockages and remove as neccessary.

To refit the clear bin:

Insert the spine into the bin runner.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

The Brush bar on the Turbine head will start spinning as soon as the machine is turned on. You can toggle the Brush bar spin speed by pulling the air release trigger on the Wand handle. There is no need to turn the Brush bar on and off for different floor types.

Checking the floor tool

Remove the Turbine head from the extension Wand by pressing the release catch.

Use a coin to turn the fastener anti-clockwise and remove the Brush bar.

Clean any hair, thread and debris from the Brush bar.

Check the openings on the tool for blockages and remove if necessary.

Refit the Brush bar and refit the end cap, turning clockwise to lock.

Rebuild and test the machine.

Has checking the floor tool resolved the problem?

You might need a replacement part.

It looks like the Turbine head is not working. You can solve this by ordering a new one below.

Turbine head

Part no. 963544-04

Replacement turbine head for your Dyson vacuum cleaner.

£60.00

Turbine head

Turbine head

Part no. 963544-04

Replacement turbine head for your Dyson vacuum cleaner.

£60.00

£60.00

£60.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

The Musclehead floor tool automatically adjusts from hard floors to carpets and vice versa. You don't need to adjust it manually.

How to use the Musclehead floor tool

The bleed valves can be opened if there is too much suction. If the performance is poor with the bleed valve open, they should be closed again.

Has checking the bleed valve resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the Musclehead for blockages

Remove the Musclehead from the extension tube.

Check the underneath of the floor tool and remove any blockages as necessary.

Has checking the floor tool resolved the problem?

Remove the hose, Wand handle and extension tube

Seperate the extension tube from the wand handle by pressing the release catch on the extension tube.

Remove the Wand handle from the hose by pressing the release catch on the Wand handle.

Remove the hose from the machine by pressing the release catches on the hose.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

Reassemble and test machine.

Has checking the hose, Wand handle and Wand resolved the problem?

Empty as soon as the dirt reaches the level of the MAX mark - do not overfill.

Emptying the bin

Switch off and unplug before emptying the clear bin.

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

To release the dirt, firmly push the red bin release button.

  • The bin will slide down, cleaning the shroud as it goes.
  • The red rod should stop level with the clear bin. If not sliding the bin back up will not be possible.
  • The bin base will then open.
  • The bin base will not open if the red button is not pushed down fully.

To minimise dust/allergen contact when emptying, encase the clear bin tightly in
a plastic bag and empty.

WARNING: You may find that the first few attempts to open the bin when empty may be difficult, this is normal as the bin seal will be new. When the machine has been in use and the bin contains any amount of dust, the bin should open normally.

Please follow the next step.

Closing the bin

Close the clear bin by pushing the bin base upwards until it clicks into place.

Push the bin base clip firmly until it clicks into position to ensure that the base is securely sealed.

Align the base of the bin with the air hose inlet and then click back into place.

Is there anything else we can help you with?

Please select the appropriate option

To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.

Check the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

The bin will slide down, cleaning the shroud as it goes.

The bin base will then open.

The bin base will not open if the red button is not pushed down fully.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check cyclone inlet and openings for any blockages and remove as neccessary.

Refit the clear bin

To refit the clear bin Insert the spine into the bin runner.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has checking the bin and cyclone resolved the problem?

Beware of sharp objects when checking for blockages.

Checking the machine for blockages

Please follow the steps in the video.

Has checking for blockages resolved the problem?

Beware of sharp objects when checking for blockages.

Check the extension tube, wand handle and hose

Separate the extension tube from the wand handle by pressing the release catch on the wand handle.

Remove the wand handle from the hose by pressing the release catch on the hose.

Press the release catch and remove the hose from the appliance.

Check the extension tube, wand handle and hose for blockages; remove as necessary.

The inspection hose

Unscrew the two Phillips screws on the clear bin locator bracket. (Do not remove any other screws.) Remove the bracket.

Firmly twist the flexible inspection hose away from the inlet next.

Inspect for blockages and remove as necessary.

Refit the flexible inspection hose and clear bin locator bracket.

Rebuild and test the machine.

Has checking for blockages resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.

Check the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

The bin will slide down, cleaning the shroud as it goes.

The bin base will then open.

The bin base will not open if the red button is not pushed down fully.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check cyclone inlet and openings for any blockages and remove as neccessary.

Refit the clear bin

To refit the clear bin Insert the spine into the bin runner.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has checking the bin and cyclone resolved the problem?

Beware of sharp objects when checking for blockages.

Checking the machine for blockages

Please follow the steps in the video.

Has checking for blockages resolved the issue?

Beware of sharp objects when checking for blockages.

Check the extension tube, Wand handle and hose

Separate the extension tube from the Wand handle by pressing the release catch on the Wand handle.

Remove the Wand handle from the hose by pressing the release catch on the hose.

Press the release catch and remove the hose from the appliance.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

The inspection hose

Unscrew the two Phillips screws on the clear bin locator bracket. (Do not remove any other screws.) Remove the bracket.

Firmly twist the flexible inspection hose away from the inlet next.

Inspect for blockages and remove as necessary.

Refit the flexible inspection hose and clear bin locator bracket.

Rebuild and test the machine.

Has checking for blockages resolved the issue?

Check the hose and seals

Remove the hose, Wand handle and extension tube.

Separate the extension tube from the Wand handle by pressing the release catch on the extension tube.

Check wand handle:

Check there are no cracks in the handle.

Check the seal on the wand handle is in place and is not damaged.

Check the extension tube seal is in place and is not damaged.

Check the hose

Check there are no rips or tears.

Ensure the seal is in place and is not damaged.

Remove the bin fully from the machine

Check both seals on the Main body are in place and not damaged.

Please select the next step

Checking the cyclone and bin

Remove the clear bin from the cyclone.

Firmly push the red bin release button.

The bin will slide down, cleaning the shroud as it goes.

The bin base will then open.

Pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Check both seals on the bin are in place and are not damaged.

Check cyclone

Check the seal on the cyclone is in place and not damaged.

Refit the clear bin

Insert the spine into the bin runner.

Push upwards until it clicks and then continue pushing until it slides home.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Attach the bin/cyclone to the machine, ensuring it clicks into place.

Is there still a noise?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Has the issue been resolved?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the machine for blockages

Remove any tools from the extension tube.

Fully extend the extension tube by pressing the red button.

Turn the machine on and place your hand over the end of the extension tube.

Is the suction strong or weak?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

When did the machine last have power?

Thermal cut out

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.

Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.

Checking the machine for blockages

Remove any tool from the extension tube.

Fully extend the extension tube by pressing the red button.

Turn the machine on and place your hand over the end of the extension tube.

Is the suction strong or weak?

Check electrical supply

Is the power cord or plug damaged?

Are the other household appliances working?

Does the vacuum work when plugged into another socket?

Change the (13 amp) fuse.

Has checking the electrics resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Test the machine

Press the rear of the switch to make sure it stays in the on position.

Please note: The switch does not light up.

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Do not wash the cyclone.

Cleaning the bin and cyclone

Remove the bin from the machine by pressing the bin release catch located to the side of the bin.

Check the openings of the duct and bin for any blockages and remove as necessary.

Cleaning the cyclone

Open the bin lid by pressing the red button on top of the cyclone, be careful to do this somewhere to capture any dust securely.

Push the button again to release the bin from the cyclone.

Use a dry cloth to clean around the cyclone to remove any finer dust or debris.

Check underneath the cyclone for any blockages and remove as necessary.

Reassemble and test machine.

Please select the appropriate option

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check cyclone inlet and openings for any blockages and remove as neccessary.

To refit the clear bin

Insert the spine into the bin runner.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has checking the bin and cyclone resolved the problem?

Using the cable

Ensure the machine is switched off.

Unplug the machine before rewinding the cable.

If the cable does not rewind, firmly pull it out and fully extend it until the red tape is visible.

The cord rewind button needs to be pressed down firmly to retract the cord for storage after use. When the button is pressed down far enough you should feel and hear a click, and the cord will retract.

Has this resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

How to use the floor tool

For use on carpet flooring, the purple seal should be in the 'up' position.

For use on hard flooring, the purple seal should be in the 'down' postion.

For use on hard flooring, the purple seal should be in the 'down' position.

Has checking the floor tool settings resolved the problem?

Adjust slider

Adjust the slider on the Cleaner head from MAX to min and retest the machine.

Has checking the seals resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the floor tool

Remove the turbine head from the extension wand by pressing the release catch.

Use a coin to turn the fastener anti-clockwise and remove the Brush bar.

Clean any hair, thread and debris from the Brush bar.

Check the opening on the Cleaner head for blockages and remove as necessary.

Refit the brushbar and refit the end cap, turning clockwise to lock.

Rebuild and test the machine.

Has checking the floor tool resolved the problem?

The Musclehead floor tool automatically adjusts from hard floors to carpets and vice versa. You don't need to adjust it manually.

How to use the Musclehead floor tool

The bleed valves can be opened if there is too much suction. If the performance is poor with the bleed valve open, they should be closed again.

Has checking the bleed valve resolved the issue?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the machine for blockages

Remove any tool from the extension tube.

Fully extend the extension tube by pressing the red button.

Turn the machine on and place your hand ove the end of the extension tube.

Is the suction strong or weak?

The Brush bar on the Turbine head will start spinning as soon as the machine is turned on. You can toggle the Brush bar spin speed by pulling the air release trigger on the Wand handle. There is no need to turn the Brush bar on and off for different floor types.

Checking the floor tool

Remove the Turbine head from the extension Wand by pressing the release catch. Use a coin to turn the fastener anti-clockwise and remove the Brush bar.

Clean any hair, thread and debris from the Brush bar.

Check the openings on the tool for blockages and remove if necessary.

Refit the brushbar and refit the end cap, turning clockwise to lock.

Rebuild and test the machine.

Has checking the floor tool resolved the problem?

To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.

Cleaning the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

The bin will slide down, cleaning the shroud as it goes.

The bin base will then open.

The bin base will not open if the red button is not pushed down fully.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check cyclone inlet and openings for any blockages and remove as neccessary.

Refit the bin

To refit the clear bin insert the spine into the bin runner.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has checking the bin and cyclone resolved the problem?

Check the hose, Wand handle and extension tube

Remove the hose, Wand handle and extension tube.

Separate the extension tube from the Wand handle by pressing the release catch on the extension tube.

Remove the Wand handle from the hose by pressing the release catch on the Wand handle.

Remove the hose from the machine by pressing the release catches on the hose.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

Reassemble and test machine

Has checking the hose, wand handle and wand resolved the issue?

You might need a replacement part.

It looks like the Turbine head is not working. You can solve this by ordering a new one below.

Turbine head

Part no. 963544-04

Replacement turbine head for your Dyson vacuum cleaner.

£60.00

Turbine head

Turbine head

Part no. 963544-04

Replacement turbine head for your Dyson vacuum cleaner.

£60.00

£60.00

£60.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Unable to slide bin up

This is usually due to the red rod not being pushed down fully so that it is flush with the clear bin.

Check the position of the RED bin release push rod.

If the bottom of the push rod is not flush with the bottom of the bin, the rod needs to be pushed down again.

Check the position again before attempting to slide up.

Slide the bin back up and close the bin base flap.

Has checking the red rod position resolved the issue?

Apologies. We can't help you online.

But our Customer Support Team will be able to solve your problem. Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Correct Wand position

When the wand is in a vertical position, the dual mode floor tool may not adjust between hard floor and carpet modes.

If the machine is powered on and the head is in ErP Max Mode, it will be difficult to change the floor mode of the cleaner head.

Ensure the power is turned off and the wand is in a normal vacuuming position as shown, and retry adjusting the dual mode between hard floor and carpet positions.

Has retesting the Dual mode floor tool resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

User guide

Is there anything else we can help you with?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Assembling your Dyson machine

  • Attach the hose to the hose inlet on the front of the machine.
  • Clip the hose to the rear of the wand handle.
  • Clip the wand handle to the extension tube.
  • Press the release catch on the extension tube to extend, ensuring it 'clicks' into place.
  • Attach the floor tool to the extension tube.
  • Insert the tools into the holster and attach to the extension tube.

Is there anything else we can help you with?

How to use the Dual mode floor tool

Connect the dual mode floor tool to the extension tube. You can adjust the extension tube as you wish using the red catch located on the extension tube.

Adjust the suction control to MAX as needed for tougher tasks.

Soleplate down. For use on Carpets only.

Brushes down. For use on smooth/hard flooring.

Is there anything else we can help you with?

There is no need to turn the Brush bar on and off for different floor types the floor tool has a row of anti-static carbon fibre filaments to remove fine dust from hard floors, and stiff nylon brushes remove ground-in dirt from carpets. There's no need to turn the Brush bar off when moving from one floor type to another.

Using the Turbine head

Connect the Turbine head to the extension tube and ensure the extension tube is fully extended.

To reduce the suction and slow Brush bar rotation, pull the release trigger.

Is there anything else we can help you with?

The Musclehead floor tool automatically adjusts from hard floors to carpets and vice versa. You don't need to adjust it manually.

Using the Musclehead floor tool

Connect the floor tool to the extension tube, ensuring it clicks into place.

You can adjust the extension tube as you wish by pressing the red catch on the extension tube.

The bleed valves can be opened if there is too much suction. If the performance is poor with the bleed valve open, they should be closed again.

Is there anything else we can help you with?

Using the extension tube

Press the release catch on the extension tube to extend fully, ensuring it 'clicks' into place.

Is there anything else we can help you with?

Attaching the accessories

The accessory tools can be attached to the extension tube, wand handle or hose.

Ensure the click securely into place before use.

Is there anything else we can help you with?

Hold the plug when rewinding onto cable reel. Do not allow the plug to whip when rewinding.

Using the cable

To retract the cable, press the button firmly until it clicks and the cable rewinds.

Is there anything else we can help you with?

Serial number location

Underneath the machine between the wheels.

Is there anything else we can help you with?

Using the suction release trigger

To reduce the suction pull the release trigger.

Is there anything else we can help you with?

Storing the accessories

Store the floor tool by inserting it in the clip at the back of the Main body.

Storing the accessory tools:

Attach the tools to the tool holster.

Clip the tool holster to the extension tube as shown below.

Is there anything else we can help you with?

You will only be able to remove the bin when the red rod has been pushed down fully so that it is flush with the bin.

Cleaning the clear bin

In the event that it is necessary to clean the clear bin:

You will only be able to remove the bin when the red rod has been pushed down fully so that it is flush with the bin.

Pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

WARNING: Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

To refit the bin

Insert the spine into the bin runner.

Push upwards until it clicks and then continue pushing until it slides home.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Is there anything else we can help you with?