Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson Cinetic Big Ball Animal 2 vacuum

Let's get your machine working.

See all steps

Please select the appropriate option

Empty as soon as the dirt reaches the level of the MAX mark - do not overfill.

Emptying the bin

Switch off and unplug before emptying the clear bin.

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

To release the dirt, firmly push the red bin release button.

  • The bin will slide down, cleaning the shroud as it goes.
  • The red rod should stop level with the clear bin. If not sliding the bin back up will not be possible.
  • The bin base will then open.
  • The bin base will not open if the red button is not pushed down fully.

WARNING: You may find that the bin lid does not open completely by itself, if this happens, push gently on the edge of the lid to get it to open to release the dirt.

Closing the bin

Close the clear bin by pushing the bin base upwards until it clicks into place.

Push the bin base clip firmly until it clicks into position to ensure that the base is securely sealed.

Align the base of the bin with the air hose inlet and then click back into place.

Is there anything else we can help with?

Check the hose and seals

Remove the hose, Wand handle and extension tube.

Separate the extension tube from the Wand handle by pressing the release catch on the extension tube.

Check Wand handle

Check there are no cracks in the handle.

Check the seal on the Wand handle is in place and is not damaged.

Check the extension tube seal is in place and is not damaged.

Check the hose

Check there are no rips or tears.

Ensure the seal is in place and is not damaged.

Remove the bin fully from the machine.

Check both seals on the Main body are in place and not damaged.

Has this resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the cyclone and bin

Remove the clear bin from the cyclone.

Firmly push the red bin release button.

The bin will slide down, cleaning the shroud as it goes.

The bin base will then open.

Pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Check both seals on the bin assembly are in place and are not damaged.

Check cyclone

Check both seals on the bin are in place and are not damaged.

Refit the bin

Insert the spine into the bin runner.

Push upwards until it clicks and then continue pushing until it slides home.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Attach the bin/cyclone to the machine, ensuring it clicks into place.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Which tool are you using?

Remove the Cleaner head

Remove the floor tool and turn the machine on.

Does the noise occur without the floor tool attached?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.

Check the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

  • The bin will slide down, cleaning the shroud as it goes.
  • The red rod should stop level with the clear bin. If not sliding the bin back up will not be possible.
  • The bin base will then open.
  • The bin base will not open if the red button is not pushed down fully.

WARNING: You may find that the bin lid does not open completely by itself, if this happens, push gently on the edge of the lid to get it to open to release the dirt.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Has checking the bin and cyclone resolved the problem?

Beware of sharp objects when checking for blockages.

Check the extension tube, Wand handle and hose

Separate the extension tube from the Wand handle by pressing the release catch on the Wand handle.

Remove the Wand handle from the hose by pressing the release catch on the hose.

Press the release catch and remove the hose from the appliance.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

Check the clear duct

Remove the clear duct found on the machine, behind the bin and cyclone.

Remove any blockages as necessary and refit the duct.

Has checking for blockages resolved the problem?

Remove the Cleaner head

Remove the Turbine head and turn the machine on.

Does the noise occur without the Turbine head attached?

Checking the floor tool

Remove the Turbine head from the extension Wand by pressing the release catch. Use a coin to turn the fastener anti-clockwise and remove the Brush bar.

Clean any hair, thread and debris from the Brush bar.

With the Cleaner head removed, check the openings on the tool for blockages and remove if necessary.

Refit the Brush bar and refit the end cap, turning clockwise to lock.

Rebuild and test the machine.

Has checking the floor tool resolved the problem?

We need a little more information to help us solve your issue.

Please call our customer service team on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.

Check the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

  • The bin will slide down, cleaning the shroud as it goes.
  • The red rod should stop level with the clear bin. If not sliding the bin back up will not be possible.
  • The bin base will then open.
  • The bin base will not open if the red button is not pushed down fully.

WARNING: You may find that the bin lid does not open completely by itself, if this happens, push gently on the edge of the lid to get it to open to release the dirt.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check the cyclone inlet and openings for any blockages and remove as necessary.

Refit the bin

To refit the clear bin Insert the spine into the bin runner.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has checking the bin and cyclone resolved the problem?

Checking the machine for blockages

Remove any tool from the extension tube.

Fully extend the extension tube by pressing the red button.

Turn the machine on and place your hand over the end of the extension tube.

Is the suction strong or weak?

The Pneumatic floor tool automatically adjusts from hard floors to carpets and vice versa. You don't need to adjust it manually.

How to use the Pneumatic floor tool

The suction control slider can be moved to the minus sign if there is too much suction. If the performance is poor with the suction control moved, it should be put back to the plus sign again.

Has checking the suction control slider resolved the problem?

You might need a replacement part.

It looks like the Pneumatic musclehead floor tool is not working. You can solve this by ordering a new one below.

Pneumatic musclehead floor tool

Part no. 968626-01

Replacement pneumatic musclehead floor tool for your Dyson vacuum cleaner.

£60.00

Pneumatic musclehead floor tool

Pneumatic musclehead floor tool

Part no. 968626-01

Replacement pneumatic musclehead floor tool for your Dyson vacuum cleaner.

£60.00

£60.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the floor tool for blockages and damage

Fully remove the floor tool from the machine.

Check the underneath of the floor tool and both inlets for blockages and remove as necessary.

Has checking the floor tool resolved the problem?

Remove the hose, wand handle and extension tube

Separate the extension tube from the wand handle by pressing the release catch on the extension tube.

Remove the hose from the machine by pressing the release catches on the hose.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

Reassemble and test machine.

Has checking the hose, Wand handle and Wand resolved the problem?

To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty.

Cleaning the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

  • The bin will slide down, cleaning the shroud as it goes.
  • The red rod should stop level with the clear bin. If not sliding the bin back up will not be possible.
  • The bin base will then open.
  • The bin base will not open if the red button is not pushed down fully.

WARNING: You may find that the bin lid does not open completely by itself, if this happens, push gently on the edge of the lid to get it to open to release the dirt.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check the cyclone inlet and openings for any blockages and remove as necessary.

To refit the bin

Insert the spine into the bin runner.

Close the bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has checking the bin and cyclone resolved the problem?

Check the clear duct

Remove the clear duct found on the machine, behind the bin and cyclone.

Remove any blockages as necessary and refit the duct.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

The Brush bar on the Turbine head will start spinning as soon as the machine is turned on. You can toggle the Brush bar spin speed by pulling the air release trigger on the Wand handle. There is no need to turn the Brush bar on and off for different floor types.

Checking the floor tool

Remove the Turbine head from the extension Wand by pressing the release catch.

Use a coin to turn the fastener anti-clockwise and remove the Brush bar.

Clean any hair, thread and debris from the Brush bar.

Check the opening on the Cleaner head for blockages and remove as necessary.

Refit the Brush bar and refit the end cap, turning clockwise to lock.

Rebuild and test the machine.

Has checking the floor tool resolved the problem?

Remove the hose, wand handle and extension tube

Separate the extension tube from the wand handle by pressing the release catch on the extension tube.

Remove the Wand handle from the hose by pressing the release catch on the Wand handle.

Remove the hose from the machine by pressing the release catches on the hose.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

Reassemble and test the machine.

Has checking the hose, Wand handle and Wand resolved the problem?

Please select the appropriate option

When did the machine last have power?

Thermal cut out

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat.

Blockage checks required

This is likely caused by a blockage.

Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.

Check electrical supply

Is the power cord or plug damaged?

Are the other household appliances working?

Does the vacuum work when plugged into another socket?

Change the (13 amp) fuse.

Has checking the electrics resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Test the machine

Press the rear of the switch to make sure it stays in the on position.

Please note: The switch does not light up.

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Do not wash the cyclone.

Cleaning the bin and cyclone

Remove the bin from the machine by pressing the red Bin release button located on the handle of the bin and cyclone.

Check the openings of the duct and bin for any blockages and remove as necessary.

Cleaning the cyclone

Open the bin lid by pressing the red button on top of the cyclone, be careful to do this somewhere to capture any dust securely.

Push the grey button on the side of the cyclone to release the bin from the cyclone.

Use a dry cloth to clean around the cyclone to remove any finer dust or debris.

Check underneath the cyclone for any blockages and remove as necessary.

Reassemble and test machine.

Has this resolved the problem?

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check the cyclone inlet and openings for any blockages and remove as necessary.

To refit the clear bin

Insert the spine into the bin runner.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Has checking the bin and cyclone resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Please select the appropriate option

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Combination tool is not working. You can solve this by ordering a new one below.

Combination tool

Part no. 967368-01

Replacement combination tool for your Dyson vacuum cleaner.

£27.50

Combination tool

Part no. 967368-01

Replacement combination tool for your Dyson vacuum cleaner.

£27.50

£27.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Pneumatic musclehead floor tool is not working. You can solve this by ordering a new one below.

Pneumatic musclehead floor tool

Part no. 968626-01

Replacement pneumatic musclehead floor tool for your Dyson vacuum cleaner.

£60.00

Pneumatic musclehead floor tool

Pneumatic musclehead floor tool

Part no. 968626-01

Replacement pneumatic musclehead floor tool for your Dyson vacuum cleaner.

£60.00

£60.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Stair tool is not working. You can solve this by ordering a new one below.

Stair tool

Part no. 967369-01

Replacement stair tool for your Dyson vacuum cleaner.

£3.50

Stair tool

Part no. 967369-01

Replacement stair tool for your Dyson vacuum cleaner.

£3.50

£3.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Checking the machine for blockages

Remove any tool from the extension tube.

Fully extend the extension tube by pressing the red button.

Turn the machine on and place your hand over the end of the extension tube.

Is the suction strong or weak?

Which floor tool are you using?

Check the Cleaner head

Press the release catch and remove the floor tool.

With the Cleaner head removed, check the openings on the tool for blockages and remove if necessary.

Check the tool for signs of damage.

Has checking the floor tool resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Combination tool is not working. You can solve this by ordering a new one below.

Combination tool

Part no. 967368-01

Replacement combination tool for your Dyson vacuum cleaner.

£27.50

Combination tool

Part no. 967368-01

Replacement combination tool for your Dyson vacuum cleaner.

£27.50

£27.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the Brush bar

For use on carpet flooring, the purple seal should be in the 'up' position.

For use on hard flooring, the purple seal should be in the 'down' position.

Check the Brush bar through the window at the front of the Cleaner head.

Does the Brush bar spin when the machine is reclined?

Check soleplate

Check the soleplate to ensure there is no debris or damage to the wheels, and check the wheels are not missing.

Is there any damage to the soleplate?

Adjust slider

Adjust the slider on the Cleaner head from MAX to min and retest the machine.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

The Brush bar on the Turbine head will start spinning as soon as the machine is turned on. You can toggle the Brush bar spin speed by pulling the air release trigger on the Wand handle. There is no need to turn the Brush bar on and off for different floor types.

Checking the floor tool

Remove the Turbine head from the extension Wand by pressing the release catch.

Use a coin to turn the fastener anti-clockwise and remove the Brush bar.

Clean any hair, thread and debris from the Brush bar.

Check the opening on the Cleaner head for blockages and remove as necessary.

Refit the Brush bar and refit the end cap, turning clockwise to lock.

Rebuild and test the machine.

Has checking the floor tool resolved the problem?

Remove the hose, wand handle and extension tube

Separate the extension tube from the wand handle by pressing the release catch on the extension tube.

Remove the hose from the machine by pressing the release catches on the hose.

Check the extension tube, Wand handle and hose for blockages and remove as necessary.

Reassemble and test machine.

Has checking the hose, Wand handle and Wand resolved the problem?

Cleaning the bin and cyclone

To remove the cyclone and clear bin unit, push the red button on the top of the carrying handle, as shown.

Check the openings of the duct and bin for any blockages and remove as necessary.

To release the dirt, firmly push the red bin release button.

  • The bin will slide down, cleaning the shroud as it goes.
  • The red rod should stop level with the clear bin. If not sliding the bin back up will not be possible.
  • The bin base will then open.
  • The bin base will not open if the red button is not pushed down fully.

WARNING: You may find that the bin lid does not open completely by itself, if this happens, push gently on the edge of the lid to get it to open to release the dirt.

To remove the clear bin unit, pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Cleaning the bin and cyclone

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

Check the cyclone inlet and openings for any blockages and remove as necessary.

To refit the bin

Insert the spine into the bin runner.

Close the bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Check the inlet

Check the inlet to the front of the machine for any blockages and remove as necessary.

Has checking the bin and cyclone resolved the problem?

Assembling your Dyson machine

  • Attach the hose to the hose inlet on the front of the machine.
  • Clip the hose to the rear of the wand handle.
  • Clip the wand handle to the extension tube.
  • Press the release catch on the extension tube to extend, ensuring it 'clicks' into place.
  • Attach the floor tool to the extension tube.
  • Insert the tools into the holster and attach to the extension tube.

Is there anything else we can help with?

We need a little more information to help us solve your issue.

Please call our customer service team on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Which floor tool are you using?

The Pneumatic floor tool automatically adjusts from hard floors to carpets and vice versa. You don't need to adjust it manually.

Using the Pneumatic floor tool

Connect the floor tool to the extension tube, ensuring it clicks into place.

You can adjust the extension tube as you wish by pressing the red catch on the extension tube.

The suction control switch can be moved to the minus sign if there is too much suction. If the performance is poor with the suction control switch open, it should be slid to the plus sign again.

Is there anything else we can help with?

There is no need to turn the Brush bar on and off for different floor types. The floor tool has a row of anti-static carbon fibre filaments to remove fine dust from hard floors, and stiff nylon brushes remove ground-in dirt from carpets.

Using the Turbine head

Connect the Turbine head to the extension tube and ensure the extension tube is fully extended.

To reduce the suction and slow Brush bar rotation, pull the release trigger.

Is there anything else we can help with?

Hold the plug when rewinding onto cable reel. Do not allow the plug to whip when rewinding.

To retract the cable, press the button firmly until it clicks and the cable rewinds.

Is there anything else we can help with?

Using the suction release trigger

To reduce the suction pull the release trigger.

Is there anything else we can help with?

Serial number location

The serial number can be found on the Main body of the machine behind the bin.

Is there anything else we can help with?

Please open the PDF for the user guide.

Is there anything else we can help with?

You will only be able to remove the bin when the red rod has been pushed down fully so that it is flush with the bin.

Cleaning the bin

In the event that it is necessary to clean the clear bin:

You will only be able to remove the bin when the red rod has been pushed down fully so that it is flush with the bin.

Pull the silver catch behind the red bin release button and slide the clear bin off the spine on the cyclone.

Clean the clear bin with cold water only.

Do not use detergents, polishes or air fresheners to clean the clear bin.

Do not put the clear bin in a dishwasher.

Do not immerse the cyclone in water or pour water into the cyclones.

Ensure the clear bin is completely dry before replacing.

To refit the clear bin

Insert the spine into the bin runner.

Push upwards until it clicks and then continue pushing until it slides home.

Close the clear bin by pushing the bin base upwards. Ensure that the bin base clicks and the clip is securely in place.

Is there anything else we can help with?