Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson DC24 Blitz It vacuum

Let's get your machine working.

See all steps

Clean the bin and cyclone

Press the button at the top of the cyclone handle and remove the bin from the machine.

Press the button again to open the bin base.

Press the grey button near the rectangular inlet to separate the clear bin from the cyclone.

The clear bin can be wiped with a damp cloth.

WARNING: Do not use any detergent or polish on any part of the machine.

Check the bin and cyclone for blockages and remove as necessary.

Ensure that the bleed valve at the top of the cyclone is free of debris and moves freely when pressed.

Clear any hair or fibres from the cyclone shroud.

WARNING: Do not use any water on the cyclone.

Once the parts are completely dry, reassemble and test the machine.

Is there anything else we can help with?

Please select the appropriate option

Turn off the Brush bar

Plug the machine in.

Recline it into the vacuuming position.

Turn it on and turn the Brush bar off using the grey switch next to the on button.

Has the noise stopped?

Clear the Brush bar

This suggests that there is a blockage in the machine.

Turn off and unplug the machine.

Lay the machine on its back.

Taking care, use a flat head screwdriver to remove the C-clip and pull the Cleaner head away from the vacuum's Main body.

Using a coin, undo the end cap and remove the Brush bar.

Carefully cut away any hair or fibres using scissors.

Check the Brush bar and end cap for signs of damage.

Refit the Brush bar

Refit the Brush bar and end cap.

Locate the end of the Brush bar that has a small screw in the centre. Place the end cap on this end.

Push the Brush bar back into the Cleaner head.

Close the end cap and lock it using a coin.

Place the C-clip onto the Cleaner head and push the head onto the machine until it clicks.

Turn on and test the machine.

Has this resolved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Brush bar is not working. You can solve this by ordering a new one below.

Brush bar

Part no. 917390-01

Replacement brush bar for your Dyson vacuum cleaner.

£14.50

Brush bar

Brush bar

Part no. 917390-01

Replacement brush bar for your Dyson vacuum cleaner.

£14.50

£14.50

£14.50

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Remove the post-filter

Recline the machine and lay it on its back.

Press the button on the ball and remove the post-filter cover.

Press the release catch on the filter and pull it out of the ball.

Check the housing for any debris and remove as necessary.

Please follow the next step.

Refit the filter

Place the filter back in the ball.

Ensure that both ends of the filter lid are connected correctly and that the lid is flush with the ball.

Test the machine.

Has this resolved the problem?

Remove the post-filter

Recline the machine and lay it on its back.

Press the button on the ball and remove the post-filter cover.

Press the release catch on the filter and pull it out of the ball.

Check the housing for any debris and remove as necessary.

Please follow the next step.

Remove the bin and cyclone

Press the button at the top of the cyclone handle.

Remove the bin and cyclone from the machine.

Turn the machine on, keeping it in the upright position.

Is the whistle still present with the cyclone removed?

Do not pick up any dust while the filters are removed.

Remove the post-filter

Recline the machine and lay it on its back.

Press the button on the ball and remove the post-filter cover.

Press the release catch on the filter.

Pull filter out of the ball.

Turn the machine on.

Is the whistle still present with the post-filter removed?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Refit the filter

Refit the filter ensuring it sits flush against the inside of the ball.

Turn the machine on.

Has this resolved the problem?

You might need a replacement part.

It looks like the Post filter is not working. You can solve this by ordering a new one below.

Post filter

Part no. 915928-12

Replacement post filter for your Dyson vacuum cleaner.

£60.00

Post filter

Post filter

Part no. 915928-12

Replacement post filter for your Dyson vacuum cleaner.

£60.00

£60.00

£60.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Where have you noticed the drop in performance?

Check the Brush bar

Plug in and switch on the machine.

Recline it into the vacuuming position.

Check the Brush bar through the window at the front of the Cleaner head.

Switch off and unplug the machine before proceeding.

Check inlet suction

Place foot on stabiliser pedal to recline machine into the vacuuming position. Lay the machine on its back.

Carefully use a flat head screwdriver to remove the C-clip.

Pull the Cleaner head away from the vacuum's Main body.

Switch the machine on.

Place your hand over the opening and test the suction.

Is the suction at the Cleaner head inlet strong or is it weaker than usual?

Switch off and unplug the machine before proceeding.

Check the Cleaner head

Using a coin, undo the end cap and remove the Brush bar.

Carefully cut away any hair or fibres using scissors.

Check the Brush bar and end cap for signs of damage.

Check the opening on the Cleaner head for blockages and remove as necessary.

Refit the Brush bar

Locate the end of the Brush bar that has a small screw in the centre. Place the end cap on this end.

Push the Brush bar back into the Cleaner head.

Close the end cap and lock it using a coin.

Place the C-clip onto the Cleaner head and push the head onto the machine until it clicks.

Turn on and test the machine.

Has this resolved the problem?

Check the lower duct hose

Turn off and unplug the machine.

Place foot on stabiliser pedal to recline machine into the vacuuming position. Lay the machine on its back.

Pull the flexible lower duct hose away from the rigid pipe.

Check the hose and the rigid pipes for damage or blockages and remove as necessary.

Refit the lower duct hose

Push the hose back onto the rigid duct, starting with the end furthest from the Cleaner head.

Position the other end onto the duct closest to the Cleaner head.

Slowly stand the machine upright until the hose slides into place.

Has this resolved the problem?

You might need a replacement part.

It looks like the Lower duct hose is not working. You can solve this by ordering a new one below.

Lower duct hose

Part no. 913962-03

Replacement lower duct hose for your Dyson vacuum cleaner.

£3.50

Lower duct hose

Lower duct hose

Part no. 913962-03

Replacement lower duct hose for your Dyson vacuum cleaner.

£3.50

£3.50

£3.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Only remove the valve hose if you feel you are able to refit it. It is slightly more difficult to refit than the lower duct hose.

Check the changeover valve

Remove the bin.

Check that the teardrop-shaped piece of clear plastic is in place and moves freely.

This should rotate from one side to the other when the Wand is pulled up and replaced in the machine.

Check the rectangular inlet for blockages and remove as necessary.

The flexible hose behind the teardrop can be removed from the top end to clear a blockage.

With the Wand removed, check that the hatch at the rear of the machine moves freely and is not obstructed.

Has this resolved the problem?

Check bin and cyclone

Press the button at the top of the cyclone handle and remove the bin from the machine.

Press the button again to open the bin base.

Press the grey button near the rectangular inlet to remove the clear bin from the cyclone.

Check the bin and cyclone for blockages and remove as necessary.

Ensure that the bleed valve at the top of the cyclone is free of debris and moves freely when pressed.

Clear any hair or fibres from the cyclone shroud.

Reassemble and test the machine.

Has this resolved the problem?

Wash the filters

Please follow the steps in the video.

Has washing the filters resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Wash the filters

Remove the clear bin and cyclone from the machine by pressing the cyclone release catch.

Remove the pre-filter

To remove filter A, lift the filter release catch on top of the bin to remove the filter from the machine.

Remove the post-filter

To remove filter B firstly recline the machine. Press the release catch located on the ball to release the filter cover. Press the red catch on the filter and pull out.

Wash both filters in cold water only (Please do not use detergent, do not wash in a dishwasher or washing machine).

Repeat the steps until the water runs clear.

Filter B should be rinsed and tapped out until the water runs clear, then tapped out again to ensure all excess water is removed. This will normally require up to 10 rinses.

Leave filter to dry in a warm place until filter is completely dry.

Do not dry filter in a tumble dryer, microwave, oven, or near an open flame.

Reassemble the machine

Replace filters and test machine.

Has washing the filters resolved the problem?

Only remove the lower duct hose if you are confident you can refit it.

Check the lower duct hose

Turn off and unplug the machine.

Recline the machine and lay it on its back.

Pull the flexible lower duct hose away from the rigid pipe.

Check the hose and the rigid pipes for damage or blockages and remove as necessary.

Refit the lower duct hose

Push the hose back onto the rigid duct, starting with the end furthest from the Cleaner head.

Position the other end onto the duct closest to the Cleaner head.

Slowly stand the machine upright until the hose slides into place.

Has this resolved the problem?

Check for reset switch

Stand at the front of the machine with the Cleaner head at your feet.

Check the left side of the Cleaner head for a red reset switch.

Does your machine have a reset switch on the Cleaner head?

Switch off and unplug the machine.

Reset the Brush bar

Please follow the steps in the video.

Turn off and unplug the machine.

Lay the machine on its back.

Taking care, use a flat head screwdriver to remove the C-clip and pull the Cleaner head away from the vacuum's Main body.

Using a coin, undo the end cap and remove the Brush bar.

Carefully cut away any hair or fibres using scissors.

Check the Brush bar and end cap for signs of damage.

Check the opening on the Cleaner head for blockages and remove as necessary.

Refit the Brush bar

Locate the end of the Brush bar that has a small screw in the centre. Place the end cap on this end.

Push the Brush bar back into the Cleaner head.

Close the end cap and lock it using a coin.

Place the C-clip onto the Cleaner head and push the head onto the machine until it clicks.

Press the reset button.

Has this resolved the problem?

You might need a replacement part.

It looks like the Cleaner head is not working. You can solve this by ordering a new one below.

Cleaner head

Part no. 915936-12

Replacement cleaner head for your Dyson vacuum cleaner.

£70.00

Cleaner head

Cleaner head

Part no. 915936-12

Replacement cleaner head for your Dyson vacuum cleaner.

£70.00

£70.00

£70.00

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Switch off and unplug the machine.

Clear the Brush bar

Turn off and unplug the machine.

Lay the machine on its back.

Taking care, use a flat head screwdriver to remove the C-clip and pull the Cleaner head away from the vacuum's Main body.

Using a coin, undo the end cap and remove the Brush bar.

Carefully cut away any hair or fibres using scissors.

Check the Brush bar and end cap for signs of damage.

Refit the Brush bar

Refit the Brush bar and end cap.

Locate the end of the Brush bar that has a small screw in the centre. Place the end cap on this end.

Push the Brush bar back into the Cleaner head.

Close the end cap and lock it using a coin.

Place the C-clip onto the Cleaner head and push the head onto the machine until it clicks.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Clear the Brush bar

Check for blockages

Turn off and unplug the machine.

Lay the machine on its back.

Taking care, use a flat head screwdriver to remove the C-clip and pull the Cleaner head away from the vacuum's Main body.

Using a coin, undo the end cap and remove the Brush bar.

Carefully cut away any hair or fibres using scissors.

Check the Brush bar and end cap for signs of damage.

Replace the Brush bar

Refit the Brush bar and end cap.

Locate the end of the Brush bar that has a small screw in the centre. Place the end cap on this end.

Push the Brush bar back into the Cleaner head.

Close the end cap and lock it using a coin.

Place the C-clip onto the Cleaner head and push the head onto the machine until it clicks.

Has clearing the Brush bar resolved the problem?

You might need a replacement part.

It looks like the Cleaner head is not working. You can solve this by ordering a new one below.

Cleaner head

Part no. 915936-12

Replacement cleaner head for your Dyson vacuum cleaner.

£70.00

Cleaner head

Cleaner head

Part no. 915936-12

Replacement cleaner head for your Dyson vacuum cleaner.

£70.00

£70.00

£70.00

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Test the hose suction

There will be no suction from the Wand while it is attached to the machine or if the vacuum is reclined.

To use the Wand, pull the handle upwards until it clicks into place.

Press the button at the base of the Wand (above the machine's on switch) to release it from the vacuum.

Remove the Wand and test the suction from the hose.

Is the suction from the hose strong or weaker than usual?

Check the Wand

Look through the Wand and remove any blockages.

Check the Wand for damage.

Has this resolved the problem?

You might need a replacement part.

It looks like the Wand handle is not working. You can solve this by ordering a new one below.

Wand handle

Part no. 914701-05

Replacement wand handle for your Dyson vacuum cleaner.

£37.50

Wand handle

Wand handle

Part no. 914701-05

Replacement wand handle for your Dyson vacuum cleaner.

£37.50

£37.50

£37.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the hose

Remove the bin from the machine.

Press the release hose release catch just below the visible portion of the hose and pull the hose up, off the rear of the vacuum.

Check the hose for any holes or tears and remove any blockages.

Reassemble and test machine.

Has this resolved the problem?

You might need a replacement part.

It looks like the Hose is not working. You can solve this by ordering a new one below.

Hose

Part no. 914702-02

Replacement hose for your Dyson vacuum cleaner.

£27.50

Hose

Hose

Part no. 914702-02

Replacement hose for your Dyson vacuum cleaner.

£27.50

£27.50

£27.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the lower duct hose

Turn off and unplug the machine.

Recline the machine and lay it on its back.

Pull the flexible lower duct hose away from the rigid pipe.

Check the hose and the rigid pipes for damage or blockages and remove as necessary.

Refit the lower duct hose

Please follow the steps in the video.

Push the hose back onto the rigid duct, starting with the end furthest from the Cleaner head.

Position the other end onto the duct closest to the Cleaner head.

Slowly stand the machine upright until the hose slides into place.

Has this resolved the problem?

Any non-domestic use may adversely affect the filter performance such as vacuuming up builders dust.

Wash the filters and check for blockages

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked. If your machine cuts out, unplug it and leave it for at least an hour to cool down. Remember to turn the power off and unplug the machine before you check the filters and look for blockages prior to re-starting the machine.

Please follow the appropriate routes to wash the filters and check for blockages.

Wash the filters

Please follow the steps in the video.

Has washing the filters resolved the problem?

Wash the filters

Your machine has two washable filters which require washing at least once every 3 months.

Remove the bin

Remove the clear bin from your machine by pressing the cyclone release catch as shown.

Remove the pre-filter

To remove filter A, lift the filter release catch on top of the bin to remove the filter from the machine.

Remove the post-filter

To remove filter B firstly recline the machine. Press the release catch located on the ball to release the filter cover. Press the red catch on the filter and pull out.

Wash the filters

Wash both filters in cold water only (Please do not use detergent, do not wash in a dishwasher or washing machine).

Repeat the steps until the water runs clear.

Filter B should be rinsed and tapped out until the water runs clear, then tapped out again to ensure all excess water is removed. This will normally require up to 10 rinses.

Dry filters

Leave filter to dry in a warm place until filter is completely dry.

Do not dry filter in a tumble dryer, microwave, oven, or near an open flame.

Reassemble the machine

Replace filters and test machine.

Has washing the filters resolved the problem?

The switch does not light up.

Press the switch

Press the rear of the switch to make sure it stays in the on position.

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check for reset switch

Stand at the front of the machine with the Cleaner head at your feet.

Check the left side of the Cleaner head for a red reset switch.

Does your machine have a reset switch on the Cleaner head?

Reset the Brush bar

Please follow the steps in the video.

Turn off and unplug the machine.

Lay the machine on its back.

Taking care, use a flat head screwdriver to remove the C-clip and pull the Cleaner head away from the vacuum's Main body.

Using a coin, undo the end cap and remove the Brush bar.

Carefully cut away any hair or fibres using scissors.

Check the Brush bar and end cap for signs of damage.

Check the opening on the Cleaner head for blockages and remove as necessary.

Refit the Brush bar

Locate the end of the Brush bar that has a small screw in the centre. Place the end cap on this end.

Push the Brush bar back into the Cleaner head.

Close the end cap and lock it using a coin.

Place the C-clip onto the Cleaner head and push the head onto the machine until it clicks.

Press the reset button.

You might need a replacement part.

It looks like the Cleaner head is not working. You can solve this by ordering a new one below.

Cleaner head

Part no. 915936-12

Replacement cleaner head for your Dyson vacuum cleaner.

£70.00

Cleaner head

Cleaner head

Part no. 915936-12

Replacement cleaner head for your Dyson vacuum cleaner.

£70.00

£70.00

£70.00

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Brush bar is not working. You can solve this by ordering a new one below.

Brush bar

Part no. 917390-01

Replacement brush bar for your Dyson vacuum cleaner.

£14.50

Brush bar

Brush bar

Part no. 917390-01

Replacement brush bar for your Dyson vacuum cleaner.

£14.50

£14.50

£14.50

How to install this part

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Clear the Brush bar

Turn off and unplug the machine.

Lay the machine on its back.

Taking care, use a flat head screwdriver to remove the C-clip and pull the Cleaner head away from the vacuum's Main body.

Using a coin, undo the end cap and remove the Brush bar.

Carefully cut away any hair or fibres using scissors.

Check the Brush bar and end cap for signs of damage.

When did the machine last have power?

Thermal cut out

Most Dyson vacuums have a built in safety system that stops the machine if it begins to overheat. This usually happens because the filters need washing or your machine is blocked.

Carry out the performance checks, and if your machine cuts out unplug and leave for at least 2 hours to cool down.

Please select the appropriate option

Which area isn't providing the performance you'd expect?

Check electrical supply

Is the power cord or plug damaged?

Are the other household appliances working?

Does the vacuum work when plugged into another socket?

Change the (13 amp) fuse.

Has checking the electrics resolved the problem?

Check the bin and cyclone

A damp or musty smell is caused when dust in the cyclone has come into contact with water.

It may not be a direct contact with water, for example when vacuuming pet hair that is slightly damp, this moisture will combine with the dust in the cyclone causing the smell.

Additionally the smell may occur if the filter goes back into the machine wet.

Press the button at the top of the cyclone handle and remove the bin from the machine.

Press the button again to open the bin base.

Press the grey button near the rectangular inlet to separate the clear bin from the cyclone.

The clear bin can be wiped with a damp cloth.

WARNING: Do not use any detergent or polish on any part of the machine.

Check the bin and cyclone for blockages and remove as necessary.

Ensure that the bleed valve at the top of the cyclone is free of debris and moves freely when pressed.

Clear any hair or fibres from the cyclone shroud.

WARNING: Do not use any water on the cyclone.

Once the parts are completely dry, reassemble and test the machine.

Has this resolved the problem?

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Bin is not working. You can solve this by ordering a new one below.

Bin

Part no. 914699-01

Replacement bin for your Dyson vacuum cleaner.

£19.00

Bin

Bin

Part no. 914699-01

Replacement bin for your Dyson vacuum cleaner.

£19.00

£19.00

£19.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Combination tool is not working. You can solve this by ordering a new one below.

Combination tool

Part no. 914361-01

Replacement combination tool for your Dyson vacuum cleaner.

£25.00

Combination tool

Combination tool

Part no. 914361-01

Replacement combination tool for your Dyson vacuum cleaner.

£25.00

£25.00

£25.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Cyclone is not working. You can solve this by ordering a new one below.

Cyclone

Part no. 914698-11

Replacement cyclone for your Dyson vacuum cleaner.

£49.00

Cyclone

Cyclone

Part no. 914698-11

Replacement cyclone for your Dyson vacuum cleaner.

£49.00

£49.00

£49.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Hose is not working. You can solve this by ordering a new one below.

Hose

Part no. 914702-02

Replacement hose for your Dyson vacuum cleaner.

£27.50

Hose

Hose

Part no. 914702-02

Replacement hose for your Dyson vacuum cleaner.

£27.50

£27.50

£27.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Lower duct hose is not working. You can solve this by ordering a new one below.

Lower duct hose

Part no. 913962-03

Replacement lower duct hose for your Dyson vacuum cleaner.

£3.50

Lower duct hose

Lower duct hose

Part no. 913962-03

Replacement lower duct hose for your Dyson vacuum cleaner.

£3.50

£3.50

£3.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Stair tool is not working. You can solve this by ordering a new one below.

Stair tool

Part no. 915100-02

Replacement stair tool for your Dyson vacuum cleaner.

£3.50

Stair tool

Stair tool

Part no. 915100-02

Replacement stair tool for your Dyson vacuum cleaner.

£3.50

£3.50

£3.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Wand handle is not working. You can solve this by ordering a new one below.

Wand handle

Part no. 914701-05

Replacement wand handle for your Dyson vacuum cleaner.

£37.50

Wand handle

Wand handle

Part no. 914701-05

Replacement wand handle for your Dyson vacuum cleaner.

£37.50

£37.50

£37.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Hose attachment

Check that the valve hatch at the base of the machine is clear of any blockages.

Push the hose down into the slot.

There will be an audible click once it is securely attached.

Wand attachment

The Wand must be turned upside down to lock into the hose.

There will be an audible click once they are securely attached.

Has this resolved the problem?

Check for damage

Check the end of the Wand for signs of damage.

Check the length of the hose for tears and the cuffs for cracks.

Ensure the button on the hose cuff is in place and springs back when pressed.

Check that the slot at the rear of the machine is not damaged.

You might need a replacement part.

It looks like the Hose is not working. You can solve this by ordering a new one below.

Hose

Part no. 914702-02

Replacement hose for your Dyson vacuum cleaner.

£27.50

Hose

Hose

Part no. 914702-02

Replacement hose for your Dyson vacuum cleaner.

£27.50

£27.50

£27.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

You might need a replacement part.

It looks like the Wand handle is not working. You can solve this by ordering a new one below.

Wand handle

Part no. 914701-05

Replacement wand handle for your Dyson vacuum cleaner.

£37.50

Wand handle

Wand handle

Part no. 914701-05

Replacement wand handle for your Dyson vacuum cleaner.

£37.50

£37.50

£37.50

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check for reset switch

Stand at the front of the machine with the Cleaner head at your feet.

Check the left side of the Cleaner head for a red reset switch.

Does your machine have a reset switch on the Cleaner head?

Release the catch by hand

Remove the bin from the machine by pressing the red Bin release button located on the handle of the bin and cyclone.

Pull the clear plastic catch on the base away from the bin.

Open the bin base and tip away the contents.

Press the bin release button on the cyclone handle.

Does the red rod slide up and down freely?

You might need a replacement part.

It looks like the Bin is not working. You can solve this by ordering a new one below.

Bin

Part no. 914699-01

Replacement bin for your Dyson vacuum cleaner.

£19.00

Bin

Bin

Part no. 914699-01

Replacement bin for your Dyson vacuum cleaner.

£19.00

£19.00

£19.00

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Apologies. We can’t help you online.

But our Customer Support Team will be able to solve your problem.

Call us on 0800-298-0298

How would you rate our online support?

1/5 Poor

2/5 Average

3/5 Good

4/5 Very Good

5/5 Excellent

Check the Brush bar

Plug in and switch on the machine.

Recline it into the vacuuming position.

Check the Brush bar through the window at the front of the Cleaner head.

Is the Brush bar spinning?

Check for reset switch

Stand at the front of the machine with the Cleaner head at your feet.