Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.
Change your contact preferences.
Change your contact preferences.

Your basket is empty. Your basket has items in it
Secure Checkout

/content/dam/contentfragment/dyson/prospect-capture/gb/en/prospect-capture-gobal-cf

This is a carousel with slides. Use Next and Previous buttons to navigate, or jump to a slide with the slide dots.

1. Bin cyclone

Primary separation removes the largest particles. Powerful centrifugal forces separate dust, dirt and hair from the airflow.

Cutaway of bin cyclone

1. Bin cyclone

Primary separation removes the largest particles. Powerful centrifugal forces separate dust, dirt and hair from the airflow.

2. Metal mesh filter

The stainless steel filter has 77,349 round holes, each created using chemical etching. They filter out anything over 250 microns.

Cutaway of metal mesh filter

2. Metal mesh filter

The stainless steel filter has 77,349 round holes, each created using chemical etching. They filter out anything over 250 microns.

3. Powerful cyclones

14 scrolled cyclones generate forces of up to 100,000g to remove dust from the airflow – so there’s no loss of suction.¹⁰

Cutaway of powerful cyclones

3. Powerful cyclones

14 scrolled cyclones generate forces of up to 100,000g to remove dust from the airflow – so there’s no loss of suction.¹⁰

4. Pre-motor filter

Electrostatically charged filter layer attracts smaller particles that would otherwise pass through.

Cutaway of pre-motor filter

4. Pre-motor filter

Electrostatically charged filter layer attracts smaller particles that would otherwise pass through.

5. Post-motor filter

1.78m of PTFE folded 136 times traps 99.99% of particles down to 0.3 microns, so you don’t breathe them in.⁹

Cutaway of post-motor filter

5. Post-motor filter

1.78m of PTFE folded 136 times traps 99.99% of particles down to 0.3 microns, so you don’t breathe them in.⁹

  • 1 Suction tested to EN IEC62885-4 CL5.8 and CL5.9, tested at the flexible inlet, loaded to bin full, in Boost mode against the cord-free stick market. (Sales data from Apr 2020 to Mar 2021).
  • 2 Laser engineered for hard floors. Effectiveness of laser influenced by ambient light conditions, debris type and surface.
  • 3 Best accuracy achieved in Auto mode. Auto ramp feature in Auto mode only. Testing based on average in home usage according to Dyson internal test data. Microscopic dust is defined as particles less than 100 microns.
  • 4 Applies in Eco mode with non-motorised tool. Actual run time will vary based on power mode, floor type and/or attachments used.
  • 5 Filtration tested against EN60312-1 CL 5.11 in Boost mode.
  • 6 Quantity and size of dust displayed on screen varies depending on usage.
  • 7 Quantity and size of dust displayed on screen varies depending on usage. Examples shown may occur within one or more displayed size range. Increase in suction power is only experienced in Auto mode when triggered by increased concentration of dust according to Dyson internal test method. Technology is optimised for Auto mode with a powered cleaner head. Particle size and densities vary.
  • 8 Quantity and size of dust displayed on screen varies depending on usage. Examples shown may occur within one or more displayed size range.
  • 9 Filtration tested against EN IEC62885-4 CL5.11 in Boost mode.
  • 10 Suction tested to EN 60312-1 CL 5.8 & CL5.9 at the hose/wand, loaded to bin full, in Boost mode.
  • 11 Applies in eco mode on hard floor. Actual run time will vary based on power mode, floor type and/or attachments used.
  • 12 Refer to instructions in the operations manual available on the Dyson website