Skip navigation
Thanks. We've saved your preferences.
You can update your contact preferences at any time in the Keep in touch section of Your Dyson. If you have a Your Dyson account, you can log in below to manage your contact options.

Dyson CSYS™ task light (White/Silver) Let's get your machine working.

Please select the appropriate option

Please select the appropriate option

The light must be used with bare hands.

Before following the steps, press the power button with a firm touch for 1 second.

The power button on the light.

Is this the first time the machine is being used?

Switch the light off. Ensure that the power cable is firmly in the power pack and base of the light.

The power button on the light.

Remove the arm from the light.

Check the underside of the arm for damage to the power cable inside the horizontal arm.

Reattach the arm, ensuring that the magnetic connector locks into place and is sat inbetween the two roller bearings.

Switch the light on.

The power button on the light.

Has reassembling the machine solved the problem?

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

Is the power cord or plug damaged?

Check other household appliances.

Check the light in another socket.

Has checking the electrics resolved the problem?

Carefully turn the light on its side.

Ensure the power cord is plugged into the centre of the base.

Carefully lay the cord through the indicated groove ensuring it does not become twisted.

Place the light upright ensuring cord remains in the slot.

Ensure the light is plugged into a wall socket and switched on.

Has checking the power cord resolved the problem?

Adjust the intensity slider on the arm of the light.

The light intensity slider on the light.

Has checking the intensity slider resolved the problem?

Unplug the light and leave for 1 minute.

Plug the light in and switch on.

Has leaving the power off resolved the problem?

We need a little more information to help us solve your issue.

Please contact our customer service team on 0800 298 0298.

Press the power button on the light.

The power button on the light.

Can the light be turned on using the machine?

Remove the arm from the light.

Check the underside of the arm for damage to the power cable inside the horizontal arm.

Slide the roller bearing back, reattach the arm ensuring the arm is sat level and the roller is engaged fully.

Has checking the carriage plates resolved the problem?

Swipe to change the intensity of the light.

The light intensity slider on the light.

Tap to change quickly between intensity levels.

The three different levels of light intensity.

Has adjusting the intensity on the machine solved the problem?

Remove the arm from the light.

Check the underside of the arm for damage to the power cable inside the horizontal arm.

Slide the roller bearing back, reattach the arm ensuring the arm is sat level and the roller is engaged fully.

Has reassembling the arm resolved the problem?

Regular maintenance is not necessary, but the light can be cleaned when needed.

Remove the arm of the light from the stand.

Turn the arm of the light over so the light is facing the ceiling.

Wipe the light with a lint-free dry cloth.

WARNING: Avoid using chemicals when cleaning the light.

Has cleaning the light solved the problem?

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please contact our team on 0800 298 0298.

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please contact our team on 0800 298 0298.

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please contact our team on 0800 298 0298.

We need a little more information to help us solve your issue.

But our Customer Support Team will be able to solve your problem.

Please contact our team on 0800 298 0298.

It is important that the light is assembled in the box as shown. Do not remove the transit tape until the light is fully assembled.

Attach the base to the vertical arm of the light.

The base assembly being pushed on to the main body.

Attach the base nut to the underside of the base and rotate clockwise to secure in place.

The fixing disk being screwed into place by placing onto the base and screwing anti-clockwise.

Carefully lay the cord through the indicated groove ensuring it does not become twisted. Plug the power cord into the base of the light.

The power connector being connected to the base of the light.

Slide the roller bearing and insert horizontal arm, ensure the magnetic connector sits between the two roller bearings.

The arm being fitted to the vertical assembly by pushing the bearings diagonally.

Ensure the two halves of the magnetic connector have made contact.

The upper bearing being pushed upwards to secure the arm in place.

Remove the transit tape from the light.

The transit tape being removed from the vertical assembly and base.

Adjust the light as needed.

The arm of the light being moved in all directions on all three axis.

Is there anything else we can help with?

Please select the appropriate option

We're glad the problem's been solved.

Please let us know if there's anything else we can help you with.

Swipe to change the intensity of the light.

The light intensity slider on the light.

Tap to change quickly between intensity levels.

The three different levels of light intensity.

Is there anything else we can help with?

The LED head can be positioned directionally in 3 axes.

Only use the heat sink arm to reposition.

The arm of the light being moved in all directions on all three axis.

Is there anything else we can help you with?

Important safety instructions

Please see the attached user guide above.

Is there anything else we can help you with?